Wireless Warehouse - Product Recount

Wireless Warehouse product recount tasks are performed with a handheld device. When you perform a product recount task, the handheld appears, as follows:

Purpose

Repeat a cycle count for a single product.

Overview

Use the product recount task to recount a specific product if a cycle count had an unacceptable variance. This task is created in Wireless Cycle Count Variance Management or can be created automatically based on options set up in Zone Task Options. You can enter the count information by scanning, or by manually typing it. For more information, see Wireless Warehouse Cycle Count Process Flow.

Performing the Task

To perform a product recount task:

  1. At the Wireless Warehouse Handheld Menu, enter Get Next Task. The bin displays at the top of the handheld screen to direct you to go to a specific bin.

  2. If the bin you are counting is not automatically entered in the Bin field, scan the bin, or enter it in the field. The product code for the product you are counting displays at the top of the handheld screen.

  3. Scan the product, or enter the product code, UPC, or GTIN in the SKU field. The product name for the product you are counting displays at the top of the handheld screen.

Note If the bin is empty, select Tools Images\bluerarw.gif No Product, and skip to step 9.

  1. If the unit of measure is not automatically entered, enter the unit of measure for the product in the U/M field.

  2. If the product you scanned or entered in step 3 is tracked by lot or serial number, scan the lot or serial number, or enter it in the Lot/Ser field.

  3. If you are not required to scan each unit of the product, enter the quantity received in the Qty field.

  4. Repeat steps 2 to 6 until you have completely counted the product for the bin.

  5. When you are finished counting, select Tools Images\bluerarw.gif OK. The Cycle Count Summary screen appears, which allows you to compare the counted and expected quantities for each product.

  6. To recount, select Tools Images\bluerarw.gif Recount. To clear the entire count and return to the main menu, select Tools Images\bluerarw.gif Clear Count.

  7. When you are satisfied with the count, select Tools Images\bluerarw.gif OK.

  8. If the product is in another bin, the next bin displays at the top of the handheld screen to direct you to go to the next bin. You can then repeat steps 2 to 10 for the bin. If you have counted the product for all bins, you have completed the task and the main menu appears.

Fields

Field

Description

Bin

Scan or enter the bin name. This field is only enabled if the Bin check box is selected for the product recount task and zone in Zone Task Options.

SKU

Scan or enter the product code, UPC, or GTIN.

U/M

Enter the unit of measure for the product. The unit of measure is automatically entered if you scan the product, or enter a product's UPC or GTIN that is associated with a unit of measure.

Lot/Ser

Scan or enter the lot or serial number of a lot- or serial-tracked product. This field is not used for products that are not tracked by lot or serial number.

Qty

Enter the quantity counted. This field is only enabled if the Enter Quantity radio button is selected for the product recount task and zone in Zone Task Options. If you need to decrease a previously counted quantity, you can enter a negative number in this field.

Counted

This field displays the quantity already counted for the selected product.

Expected

This field displays the quantity on hand in the system for the selected product and bin. This field is only available if Visible is selected in the Count Display field for the highest cycle count rule in the cycle count rule hierarchy. For more information, see Cycle Count Rules Hierarchy FAQ.

Tools Menu

Menu Command

Description

OK

Select this option when you are finished counting. When you select this option, the Cycle Count Summary screen appears, and allows you to compare the counted and expected quantities for the product.

Undo

Select this option to undo the last product counted. Use this option if you make a mistake on a count, and want to delete the incorrect information.

No Product

Select this option to indicate the bin is empty.

Menu

Select this option to suspend the task and return to the main menu. For more information on the menu, see Wireless Warehouse Handheld Menu.

Info Menu

Menu Command

Description

Ref #

Select this option to display the cycle count number.