Wireless Warehouse product count tasks are performed with a handheld device. When you perform a product count task, the handheld appears, as follows:
Cycle count a single product.
Use the product count task to perform a cycle count of a specific product, so that you can confirm the inventory of the product in a zone. This task is created in Create Cycle Count Tasks. You can enter the count information by scanning, or by manually typing it. For more information, see Wireless Warehouse Cycle Count Process Flow.
To perform a product count task:
At the Wireless Warehouse Handheld Menu, enter Get Next Task. The product count screen appears, as shown above. The bin displays at the top of the handheld screen to direct you to go to a specific bin.
If the bin you are counting is not automatically entered in the Bin field, scan the bin, or enter it in the field. The product code for the product you are counting displays at the top of the handheld screen.
Scan the product, or enter the product code, UPC, or GTIN in the SKU field. The product name for the product you are counting displays at the top of the handheld screen.
Note If the bin is empty, select Tools No Product, and skip to step 9.
If the unit of measure is not automatically entered, enter the unit of measure for the product in the U/M field.
If the product you scanned or entered in step 3 is tracked by lot or serial number, scan the lot or serial number, or enter it in the Lot/Ser field.
If you are not required to scan each unit of the product, enter the quantity received in the Qty field.
Repeat steps 2 to 6 until you have completely counted the product for the bin.
When you are finished counting all products, select Tools OK. The Cycle Count Summary screen appears, which allows you to compare the counted and expected quantities for the product.
To recount, select Tools Recount. To clear the entire count and return to the main menu, select Tools Clear Count.
When you are satisfied with the count, select Tools OK.
If the product is in another bin, the next bin displays at the top of the handheld screen to direct you to go to the next bin. You can then repeat steps 2 to 10 for the bin. If you have counted the product for all bins, you have completed the task and the main menu appears.
Field |
Description |
Bin |
Scan or enter the bin name. This field is only enabled if the Bin check box is selected for the product count task and zone in Zone Task Options. |
SKU |
|
U/M |
Enter the unit of measure for the product. The unit of measure is automatically entered if you scan the product, or enter a product's UPC or GTIN that is associated with a unit of measure. |
Lot/Ser |
Scan or enter the lot or serial number of a lot- or serial-tracked product. This field is not used for products that are not tracked by lot or serial number. |
Qty |
Enter the quantity counted. This field is only enabled if the Enter Quantity radio button is selected for the product count task and zone in Zone Task Options. If you need to decrease a previously counted quantity, you can enter a negative number in this field. |
Counted |
This field displays the quantity already counted for the selected product. |
Expected |
This field displays the quantity on hand in the system for the selected product and bin. This field is only available if Visible is selected in the Count Display field for the highest cycle count rule in the cycle count rule hierarchy. For more information, see Cycle Count Rules Hierarchy FAQ. |
Menu Command |
Description |
OK |
Select this option when you are finished counting. When you select this option, the Cycle Count Summary screen appears, and allows you to compare the counted and expected quantities for the product. |
Undo |
Select this option to undo the last product counted. Use this option if you make a mistake on a count, and want to delete the incorrect information. |
No Product |
Select this option to indicate the bin is empty. |
Menu |
Select this option to suspend the task and return to the main menu. For more information on the menu, see Wireless Warehouse Handheld Menu. |
Menu Command |
Description |
Ref # |
Select this option to display the cycle count number. |