Menu Path: Warehouse Management Shipment Processing Printing Pick Demand Reprint
Reprint already-printed pick demands.
Use Pick Demand Reprint to reprint unconfirmed pick demands. Pick demands would get reprinted in the following situations:
The original pick demand was lost or damaged.
During the printing of the original pick demand, the pick demand printer had a problem and pick demand printing needs to be resumed from where it stopped.
Great care should be exercised when reprinting pick demands to avoid duplicate picking of products. Reprinted pick demands print with ** REPRINT** on them to differentiate them from the original printed pick demand. Pick Demand Confirm will not allow a pick demand to be confirmed multiple times as a control point.
Note To reprint a pick demand summary report, you must reprint pick demands (not necessarily to paper).
Button |
Description |
Exit |
Click this button to close the Pick Demand Reprint window. |
Show Data |
Click this button to refresh data on the Alerts tab. This button is only available if you click the Alerts tab. |
|
Click this button to output pick demands that meet the selected criteria on the Selection tab. |
Reprint |
Click this button to display Alert Report Printing, which allows you to reprint alert reports. This button is only available if you click the Alerts tab. |
Recreate Pick Demands |
Click this button to fill in the Selection tab with relevant alert types and recreate pick demands for the quantities on the alert. This uses the same original warehouse wave for pick demands that initiated the alert for consistency. This button is only available if you click the Alerts tab. |
Related Demands |
Click this button to display Related Tasks for Pick Demand Alerts, which allows you to track what has been done on an order line. Click this button if you clicked the Manual Replenish button to create a task for an alert. You can see what you have done and what stage this move is in so you do not end up moving the same product more than once. This button is only available if you click the Alerts tab. |
Manual Replenish |
Click this button to create a bin move demand, either wireless or paper for a selected No Pick Bin or U/M Break alert. Inventory is allocated for the move and the demand must be confirmed in Wireless Warehouse or in Inventory Bin Move Confirm and Cancel. This button is only available if you click the Alerts tab. |
Generate Bin Moves |
Click this button to create pick alert move demands for alerts in the selected alert batch generated because no pick bin was available. This button is only available if you click the Alerts tab. If you click this button, you are asked to confirm that you want to create pick alert move demands. If you click the Yes button, the software attempts to automatically create the pick alert move demands. Note Pick alert move demands are used to move products to the primary pick bin for the unit of measure of the product/location (or the primary pick bin for the product/location if a primary pick bin is not set up for the unit of measure). Pick alert move demands are only generated if the primary pick bin is in the selected zone, product is in a bin from which it cannot be picked, the primary pick bin is set up for the product/location, and there are not existing bin move demands for the product. If the demands are created successfully, you are asked if you want to print the demands. Click the Yes button to display Inventory Bin Move Report, which allows you to print the pick alert move ticket and the Bin Move Summary Report. If the demands are not created successfully, you are asked if you want to print the Bin Move Summary Report. Click the Yes button to display Inventory Bin Move Report, which allows you to print the Bin Move Summary Report that provides information on why the bin move demands were not created. Note Pick alert move demands may be generated to move product for several pick demands if possible. The software attempts to pick in the most efficient method possible (from the fewest number of bins). If a product needs to be picked in multiple units of measure, a separate pick alert move demand is created for each unit of measure. |
Routing Interface Export |
Click this button to display Routing Interface Pick Demand Export, which allows you to export pick demand information to third-party routing software. This button is only available if you have set up a routing interface in Routing Interface Maintenance. |
Routing Interface Import |
Click this button to display Routing Interface Pick Demand Import, which allows you to import pick demand information from third-party routing software. This button is only available if you have set up a routing interface in Routing Interface Maintenance. |
Field or Button |
Description |
Enter the shipping location prefix or name for the pick demands, or click one of the Lookup buttons to select a shipping location prefix or name. The location defaults from the location entered in the Shipping Location field in User Extended Options. |
Field or Button |
Description |
Select this check box to print pick demands for all zones. This defaults from Location Maintenance for the selected shipping location. |
|
Enter a zone for which to print pick demands, or click the Lookup button to select a zone. This field is only enabled if you clear the All Zones to Print check box. |
|
Click this button to display Zone List, which allows you to select specific zones for which to print pick demands. This button is only enabled if you clear the All Zones to Print check box. If you click this button and select zones, the check box to the right of the button is selected. |
|
This check box is disabled in this window. |
|
Select this check box to print pick demands for all pick groups. This check box is selected by default. A pick group is the grouping of products for pick demand creation purposes only; depending on the nature of your products and warehouse logistics, you may want to create pick demands for certain groups of products independently from other groups of products. |
|
Enter a pick group for which to print pick demands, or click the Lookup button to select a pick group. This field is only enabled if you clear the All Pick Groups check box. |
|
Select this check box to print pick demands for all order pick groups. This check box is selected by default. |
|
Enter an order pick group for which to print pick demands, or click the Lookup button to select a pick group. This field is only enabled if you clear the All Order Pick Groups check box. |
|
Select whether to filter by customer code, billing customer code, customer name, or billing customer name. |
|
All Customer Codes/All Billing Customer Codes/All Customer Names/All Billing Cust Names |
Select this check box to print pick demands for all customer codes, billing customer codes, customer names, or billing customer names. This check box defaults from the selected shipping location. |
From (Customer Code/Billing Customer Code/Customer Name/Billing Customer Name) |
Enter the first customer code, billing customer code, customer name, or billing customer name in a range of customers for which to print pick demands, or click the Lookup button to select a customer code, billing customer code, customer name, or billing customer name. This field is only enabled if you clear the related check box. |
To (Customer Code/Billing Customer Code/Customer Name/Billing Customer Name) |
Enter the last customer code, billing customer code, customer name, or billing customer name in a range of customers for which to print pick demands, or click the Lookup button to select a customer code, billing customer code, customer name, or billing customer name. This field is only enabled if you clear the related check box. |
Select whether to filter by order number, bill of lading number, pick demand number, or customer purchase order number. |
|
Select this check box to print all orders, bills of lading, pick demands, or customer purchase orders that meet the selected criteria. |
|
Enter the first order or pick demand number in a range of numbers for which to print pick demands, or click the Lookup button to select an order or pick demand number. This field is only enabled if you clear the All Orders or All Pick Demands check box. |
|
Enter the last order or pick demand number in a range of numbers for which to print pick demands, or click the Lookup button to select an order or pick demand number. This field is only enabled if you clear the All Orders or All Pick Demands check box. |
|
Enter a bill of lading number for which to print pick demands, or click the Lookup button to select a bill of lading number. This field is only enabled if you clear the All BOLs check box. |
|
Enter a purchase order number for which to print pick demands, or click the Lookup button to select a purchase order number. This field is only enabled if you clear the All Custs PO # check box. |
|
Select whether to create pick demands or order staging demands for single-single orders, orders that are not single-single orders, or both single-single orders and orders that are not single-single orders. NOTE An order containing one fixed kit product is not categorized as a single-single order. EXAMPLE You are picking for many direct-to-consumer single-single orders, and you don't want to pick for larger customers at the same time. In this case, select the Single-single Orders radio button. |
|
Select this check box to print pick demands for all order created dates. |
|
Enter the first created date in a range of created dates for which to print pick demands, or click the drop-down arrow to select a created date. This field is only enabled if you clear the All Created Dates check box. If you are outputting pick demands via Scheduling Assistant, you can select a virtual date for this field. |
|
Enter the last created date in a range of created dates for which to print pick demands, or click the drop-down arrow to select a created date. This field is only enabled if you clear the All Created Dates check box. If you are outputting pick demands via Scheduling Assistant, you can select a virtual date for this field. |
|
Select this check box to print pick demands for all shippers. This check box defaults from the selected shipping location. |
|
Enter a shipper ID for which to print pick demands, or click the Lookup button to select a shipper ID. This field is only enabled if you clear the All Shippers check box. |
|
Click this button to display Shipper List, which allows you to select specific shippers for which to print pick demands. This button is only enabled if you clear the All Shippers check box. If you click this button and select shippers, the check box to the right of the button is selected. |
|
Select this check box to print pick demands for all sales locations. |
|
Enter a sales location prefix for which to print pick demands, or click the Lookup button to select a sales location prefix. This field is only enabled if you clear the All Sales Locations check box. |
|
Enter a sales location name for which to print pick demands, or click the Lookup button to select a sales location name. This field is only enabled if you clear the All Sales Locations check box. |
|
Select this check box to print pick demands for all customer pick groups. |
|
Enter a customer pick group for which to print pick demands, or click the Lookup button to select a customer pick group. This field is only enabled if you clear the All Cust. Pick Groups check box. |
|
Select this check box to print pick demands for all order classes. |
|
Enter an order class for which to print pick demands, or click the Lookup button to select an order class. This field is only enabled if you clear the All Order Classes check box. |
|
Click this button to display Order Class List, which allows you to select specific order classes for which to print pick demands. This button is only enabled if you clear the All Order Classes check box. If you click this button and select order classes, the check box to the right of the button is selected. |
|
Select this check box to print pick demands for all print batches. This check box in only available if you select the Order Number, P/D #, or Cust PO # radio button. |
|
Enter a print batch for which to print pick demands, or click the Lookup button to select a print batch. This field is only enabled if you clear the All Batches check box. |
|
Select this check box to print pick demands for all sequences. Pick Demands are assigned a sequence number based on the order of printing. So, if the first 20 pick demands in a print batch printed correctly, but sequence numbers 21-45 did not, you can select to print only sequence numbers 21-45. In this case, you would clear this check box and enter the range in the From and To fields. |
|
Enter the first sequence number in a range of sequence numbers for which to print pick demands, or click the Lookup button to select a sequence number. This field is only enabled if you clear the All Sequences check box. |
|
Enter the first sequence number in a range of sequence numbers for which to print pick demands, or click the Lookup button to select a sequence number. This field is only enabled if you clear the All Sequences check box. |
|
Select this check box to print pick demands for all pallets. This check box is only available if you select the BOL # radio button, and only enabled if you clear the All BOLs check box. |
|
Enter a pallet tag number for which to print pick demands, or click the Lookup button to select a pallet tag number. This field is only available if you select the BOL # radio button, and only enabled if you clear the All Pallets check box. |
|
Select this check box to print pick demands for all fleet delivery waves. Waves are sorted by wave sequence. This check box defaults from the selected shipping location. |
|
Select a wave for which to print pick demands. This grid is only enabled if you clear the All Waves check box. To select multiple waves, hold down the Ctrl key and click each wave. To select a range of waves, hold down the Shift key and click the starting and ending wave. |
|
Select this check box to print pick demands for all fleet delivery routes. Routes are sorted by route sequence. This check box defaults from the selected shipping location. |
|
Select a fleet delivery route for which to print pick demands. This grid is only enabled if you clear the All Routes check box. To select multiple routes, hold down the Ctrl key and click each route. To select a range of routes, hold down the Shift key and click the starting and ending route. |
This tab is disabled in this window.
Field or Button |
Description |
Enter a pick alert batch, or click the Lookup button to select a pick alert batch. A pick alert batch is assigned after a pick or print run has alert records. It will contain the entire alert report so you can go back and review it at a later time. Example If pick demands are printed resulting in an alert report, this will be alert batch 1. If you do it again, it is alert batch 2. You can now look at either of them or reprint either of them. |
|
This grid displays pick alert information. For more information, see Pick Alerts. |
|
This grid displays the order of alert reason codes and defaults from Location Maintenance for the selected shipping location. Click the arrow buttons to rearrange the sort order of alert reason codes. |
Field or Button |
Description |
Select this check box to reprint pick demands. This defaults from the selected shipping location. The printer selected will come from the zone, shipping location, or the user’s default printer |
|
Select this check box to print pick demands to the printer specified in the Printer field instead of the printer specified for each zone. This check box is selected by default, and is only available if the Printer radio button is selected. |
|
Click the Lookup button to select one of the following WMS export method options:
This field is only available if the location is set up to use an external WMS, and if you are allowed to change the export method for pick demands. |
|
Select this check box to print pick labels only for the specific zone entered in the Zone field on the Selection tab. This defaults from the zone selected. The label printer will also default from the zone selected. For a list of available output fields, see Picking Label Output Fields. |
|
Select this check box to print a summary of all pick demands printed. This works only if the Print Pick Demands check box is selected. This defaults from the selected zone (if one is selected), or the location. This summarizes the details of a pick batch, sorted and summarized by product code and recommended bin. |
|
This check box is not used in this window. |
|
Select this check box to not output pick demands when exporting pick demands to the WMS. This check box is only available if the location is set up to use an external WMS. This check box is selected by default if the Skip Printing Pick Demand for WMS check box is selected for the location on the WMS tab in Location Maintenance. |
|
Select whether to divide the summary report by product, customer, or bill of lading. This radio set is only enabled if you select the Print Summary Report check box. |
|
Select this check box to generate EDI warehouse shipping orders, which you can use to inform a third-party logistics warehouse of quantities to ship. This check box is only enabled if the Print Pick Demands check box is selected, and if the selected location is set up to process EDI warehouse shipping orders/advices. For more information on EDI warehouse shipping orders/advices, see EDI Forms. |
|
Select this check box to sort order staging demands by bin. If this check box is cleared, order staging demands are sorted by product. This check box is only available if you select Order Staging Demands for the Selected Print Options field. |
|
Select one of the following options:
|
|
Select one of the following line item sort options:
This defaults from the selected shipping location. |
|
Select a secondary line item sort option. This defaults from the selected shipping location. You can select one of the following sort options:
Note If you select the Product radio button for the Line Item Sort option, you can only select Bin Sequence. If you select the Bin Sequence radio button for the Line Item Sort option, you can only select Product Code or Product Name. |
|
Select one of the following output options:
NOTE Additional information is included when you output to Excel, such as the Wireless Warehouse task ID for each pick demand. |
|
Save Report File |
Select this check box to save the Crystal Reports report (.rpt) file for the report to the folder entered in the Report Working Directory field for your user ID in User Profile Maintenance. You can use the report file to customize the report. For more information, see Crystal Reports FAQ. This check box is only available if you select the Screen radio button. |
Save Access Database File |
Select this check box to save the Access database (.mdb) file for the report to the folder entered in the Report Working Directory field for your user ID in User Profile Maintenance. You can use the Access database file to customize the report. For more information, see Crystal Reports FAQ. This check box is only available if you select the Screen radio button. |
Output File Type |
|
This check box is disabled in this window, and is only available if you select the File radio button. |
|
Output Directory |
Enter the location for the output pick demands, or click the Lookup button to navigate to and select a location. |
Excel Format Name |
|
Format Maintenance |
Click this button to display Excel Format Maintenance, which allows you to set up Excel formats. This button is only available if you select the Excel radio button. |
Save As Type |
|
Include header |
|
Delimiter |
|
Enclosing Character |
|
Printer |
Click the Lookup button to select a printer. This field is only available if you select the Printer radio button. NOTE To use a printer specified in this field instead of the default zone printer, select the Override Zone Printers check box. |
Enter a subject for the pick demands email. This field is only available if you select the Email radio button. If you leave this field blank, the subject is the pick demands title. |
|
Enter a prefix for the pick demands file name. This field is only available if you select the Email radio button. |
|
Select this check box if you want to include additional comments with the emailed report. If you select this check box, the Additional Comments window appears after you click the Print button in the ribbon, and allows you to enter the comments. This check box is only available if you select the Email radio button. |
|
Select this check box to include the entire heading from the first page of the pick demands on all pages of the pick demands. This check box is cleared by default, and only enabled if you select the Screen, File, Printer, or Email radio button. |
|
Select this check box to include the pick demands title, page number, and printed date/time on all pages of the pick demands. This check box is selected by default and only enabled if you select the Screen, File, Printer, or Email radio button, and if the Print Full Heading on All Pages check box is cleared. |
|
Select this check box to include horizontal shading on alternate lines of the pick demands to make it easier to read the data. This check box is cleared by default, and is only enabled if you select the Screen, File, Printer, or Email radio button. |
|
Collate |
Select this check box to collate the printed copies of the report (if you are printing multiple copies of the report). This check box is cleared by default, and is only enabled if you select the Printer radio button and enter a value greater than 1 in the Number of Copies field. Example You are printing five copies of a 20 page report to distribute to five different people. Leave this check box selected, so that pages 1-20 of the first copy prints, then pages 1-20 of the second copy, etc. If you clear this check box, five copies of page 1 prints, then five copies of page 2, etc. |
Click the Lookup button to select the color of horizontal shading on the pick demands. This Lookup button is only enabled if you select the Horizontal Shading radio button. |
|
Enter the number of copies of the pick demands to print. This field is only enabled if you select the Printer radio button. |
|
Select whether the pick demands are run now or run by Scheduling Assistant. If you select the Schedule radio button, you can specify when the process occurs. These radio buttons are only enabled if the Disable Scheduling Assistant check box is cleared for your user ID in User Profile Maintenance. Note If you select the Schedule radio button, you cannot output to the screen. If you print pick or shipping labels using Scheduling Assistant, label software and drivers must be set up on the computer that runs Scheduling Assistant. |
|
Time |
|
Date |
|
Task Occurs |
Select one of the following options:
These radio buttons are only enabled if you select the Schedule radio button. |
Frequency |
These radio buttons are only available if you select the Every radio button. |
Day of Week |
|
Repeat Every X Days |
|
Repeat On |
|
Repeat Every X Minutes |
|
Triggering Task Id |
|
Triggering Task Name |
|
Triggering Task Description |
|
Task Description |
|
Scheduling Assistant Queue |
Enter an active Scheduling Assistant queue for the task, or click the Lookup button to select a Scheduling Assistant queue. This defaults to the default queue for your user ID. This field is only enabled if you select the Schedule radio button, and you are assigned to a queue other than the Default queue. |
External Email |
|
Screen Alert |
|
Internal Email |
|
This grid displays report files set up for the pick demands, and is only available if report files are set up for the program in Report File Maintenance. This grid includes the following columns:
|